Spare Parts

Assault spare partsFor AssaultBike, AssaultRunner and AssaultRower

Assault spare parts: find the right part for your machine

An Assault machine is built for many years of training. As with any piece of equipment used regularly and hard, individual components wear out over time, or a part breaks after transport or a fall. Then you do not want to replace the whole machine, just the part that is missing. On this page you will find the overview of the Assault spare parts for AssaultBike, AssaultRunner and AssaultRower.

You will find out how to find spare parts by model, which parts are typically needed, which tools help with fitting and what to look out for in maintenance.

Right metal pedal for the AssaultBike

Pedal for the AssaultBike

Front Roller Assembly for the AssaultRunner

Front roller for the AssaultRunner

Computer Assembly for the AssaultRower

Computer for the AssaultRower

Spare parts for Bike, Runner and Rower

The spare parts are sorted by machine and model. That way you land directly in the right category and do not have to search through all the parts.

MachineCategoryTypical parts
AssaultBikeBike spare parts with the subgroups Classic, Pro X and ElitePedals, crank arms, chains, seat, handlebars, display, sensors, screws
AssaultRunnerRunner spare parts with the subgroups Pro and EliteRollers, side panels, console, sensor cables, transport wheels
AssaultRowerRower spare parts with the subgroup EliteComputer and other assemblies
Accessories and miscellaneousMiscellaneousWind screen, thread locker, tools

If you are not yet sure which model you own, the model overviews help: for the bikes, the AssaultBike overview shows you the variants, for the treadmills the AssaultRunner overview and for the rowers the AssaultRower overview.

How to find the right spare part

The most common mistake when buying spare parts is a part that looks similar but does not fit your model. This sequence keeps you on the safe side:

  • Determine the model: Classic, Pro X or Elite for the bike, Pro or Elite for the runner, Elite for the rower. The name is on the machine and in your purchase documents.
  • Open the category: Start in the matching model category or use the "Model" filter in the overall overview.
  • Read the part name: The names contain the side (Right/Left), the year of manufacture or position numbers. Numbers in brackets generally refer to positions in the parts diagram.
  • Use the parts diagram: The exploded view shows you how the machine is built and where the part you are looking for sits.
  • Ask if you are unsure: Write to us via the contact form and give the model, the part and, if possible, a photo.

What matters

  • Right and left differ on many parts: pedals, crank arms, chains and linkage arms exist for both sides
  • For chains and pedals, the year of manufacture is sometimes in the name
  • Display and console differ depending on the model

Spare parts for the AssaultBike

The AssaultBike drives you with arms and legs. Accordingly, the drive and moving parts are the most heavily stressed. The spare parts are available for the models AssaultBike Classic, AssaultBike Pro X and AssaultBike Elite.

Drive and crank

These include crank arms, the bell crank with chainring, the chains and the chain tensioner. The chains are available separately for the right and left side, for example Chain Right Side, and the Chain Tensioner keeps the chain under tension. The bottom bracket and the crank fixing screws are also available individually.

Pedals, seat and handlebars

The Right Pedal in All Metal and the left variant are available individually. For the seat position there are parts around the saddle, seat post and seat rail, for example the Assault Airbike Saddle or the Seat for the Airbike Elite. For the handlebars, handle bar assemblies for right and left are available, also as a Pro version.

Display, sensors and cladding

The display shows your training data. If it fails, the AssaultBike Classic Display or the Assault Console Display-R2.0 will help. For speed measurement there are sensor cables and magnet parts such as the Speed Sensor Magnet & Plate Assembly. There are also panels, covers and battery compartment covers.

Spare parts for the AssaultRunner

The AssaultRunner runs motorless on a curved belt. The spare parts are sorted by model for the AssaultRunner Pro and AssaultRunner Elite. The most important groups:

Treadmill technology and rollers

The running surface of the Runner runs over rollers and deflectors. For this there is, among other things, the Front Roller Assembly, the Guide Pulley Assembly as a deflection pulley and the Right Rear Roller Finger Guard Assembly as a finger guard on the rear roller. If your belt runs unevenly or makes noise, it is worth looking at these assemblies first.

Housing and covers

The side covers are called Sidecase Assembly and are available separately for left and right as well as front and rear, for example Sidecase Assembly Left Rear. There are also the Upright Cover Assemblies on the struts. These parts are important if covers have broken or come loose after transport.

Console and sensors

The AssaultRunner Console shows you your training data. The readings come via sensor cables, which come in different lengths: Speed Sensor Cable Upper, Middle and Lower as well as the complete Speed Sensor Cable Assembly. If the display shows no or wrong values, check the cables and plug connections before replacing the console.

Transport, set-up and assembly

The Transport Wheel Assembly is used for moving, the Leveling Foot Assembly for a secure stance. The Assembly Hardware/Tool Kit contains screws and tools for assembly and is handy if you want to take the machine apart and rebuild it, for example when moving house.

You will find all the parts in the Runner spare parts category.

Spare parts for the AssaultRower

For the AssaultRower Elite you will find the parts for the rowing trainer in the Rower spare parts category, for example the Assault AirRower Computer Assembly. If you cannot find a part, write to us via the contact form.

Wear parts and maintenance

Some parts are wear parts and become due sooner or later. On the bike these are mainly chains, pedals, saddle and screws, on the runner rollers and sensor cables. The more regularly you check your machine, the sooner wear is noticed, before it becomes a failure.

Check pointWhat to watch for
Chains (bike)Fit, tension and condition of the links
Pedals and crank armsPlay, noises, loose screws
Seat and seat postFirm hold, clean locking
Display and sensor cablesDisplay and readings stable
Rollers and cladding (runner)Even running, no loose covers
Levelling feetMachine stands straight and stable

Detailed notes on maintenance are given in the expert guide to equipment care and safety.

Tools and accessories

Some jobs can only be done with the right tool. In the shop you will find:

Crank arm puller for AirBike Classic and Elite

Crank arm puller

Loctite 243 thread locker

Thread locker

Wind screen for the Classic bike

Wind screen

Fitting tips

You can fit most parts yourself with standard tools. These general notes help:

  • Put the machine down safely before working and clear accessories such as straps or mats out of the way
  • Only remove old parts once you have compared the spare part with the original
  • Sort screws and washers and photograph the order
  • Secure screws with thread locker according to the manufacturer's instructions
  • After fitting, check all screw connections and test the machine with a light load

If you are unsure, have the work done by a professional, especially for the drive and crank arms. If you want to get to know your machine from the ground up, take a look at the overview pages for AssaultBike, AssaultRunner and AssaultRower.

FAQ: frequently asked questions about Assault spare parts

How do I find the right spare part?
First determine your model (Classic, Pro X or Elite) and open the matching category. In the overall overview you can also narrow down with the "Model" filter.

How can I see whether a part is for the right or left?
In the name: Right means right, Left means left. For pedals, "Right" or "Left" pedal is also in the title.

What do the numbers in brackets mean?
They generally refer to position numbers in the parts diagram and show which individual parts belong to an assembly.

Is there a parts diagram?
Yes, the exploded view helps you with orientation. You will find it with the spare parts in the shop.

Are there spare parts for all bike models?
Yes, there are spare parts for AssaultBike Classic, Pro X and Elite. You will find them in the subgroups of the bike spare parts.

Are there spare parts for the AssaultRunner Classic?
The Runner categories are sorted by Pro and Elite. If you are looking for a part for the Classic, write to us via the contact form.

Which parts wear out most easily?
On the bike mainly chains, pedals, saddle and screws, on the runner rollers and sensor cables. Regular visual checks help you react early.

Which tool do I need for the crank arms?
For removing crank arms on the Classic and Elite there is the crank arm puller in the shop.

How do I secure screws against loosening?
With thread locker such as Loctite 243 of medium strength. Follow the manufacturer's instructions on the packaging.

I cannot find my part. What should I do?
Write to us via the contact form with the model, a description of the part and, if possible, a photo.

Can I also order spare parts for an older machine?
For many parts the year of manufacture is in the name. Check that and, if in doubt, ask via the contact form.

Is fitting difficult?
Many parts can be swapped with standard tools. For the drive and crank arms you should work carefully or have a professional do it.

Product added to wishlist
Product added to compare.